jai recupere tout un tas de chose comme ca
smartctl 5.43 (build date Apr 27 2012) [x86_64-apple-darwin11.3.0] (local build)
Copyright (C) 2002-12 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST31000528ASQ
Serial Number: 5VP3G01S
LU WWN Device Id: 5 000c50 01f675671
Firmware Version: AP24
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Jul 8 13:03:18 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 189) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000e 118 078 006 Old_age Always - 198720749
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3812
5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 8002
7 Seek_Error_Rate 0x000f 062 060 030 Pre-fail Always - 214844126899
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16751
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1101
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 6980
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 51540393997
189 High_Fly_Writes 0x003a 063 063 000 Old_age Always - 37
190 Airflow_Temperature_Cel 0x0022 046 042 045 Old_age Always In_the_past 54 (4 143 55 20 0)
194 Temperature_Celsius 0x0022 054 058 000 Old_age Always - 54 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 044 018 000 Old_age Always - 198720749
197 Current_Pending_Sector 0x0012 097 095 000 Old_age Always - 155
198 Offline_Uncorrectable 0x0010 097 095 000 Old_age Offline - 155
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 6653 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6653 occurred at disk power-on lifetime: 16708 hours (696 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 ff ff ff ef 00 00:21:09.304 READ DMA EXT
35 00 10 ff ff ff ef 00 00:21:09.303 WRITE DMA EXT
35 00 08 ff ff ff ef 00 00:21:09.303 WRITE DMA EXT
35 00 08 ff ff ff ef 00 00:21:09.303 WRITE DMA EXT
35 00 08 ff ff ff ef 00 00:21:09.302 WRITE DMA EXT
Error 6652 occurred at disk power-on lifetime: 16708 hours (696 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 6a ff ff ff ef 00 00:20:56.269 READ DMA EXT
25 00 21 ff ff ff ef 00 00:20:56.268 READ DMA EXT
25 00 04 ff ff ff ef 00 00:20:56.257 READ DMA EXT
25 00 6c ff ff ff ef 00 00:20:56.256 READ DMA EXT
25 00 7c ff ff ff ef 00 00:20:56.247 READ DMA EXT
Error 6651 occurred at disk power-on lifetime: 16708 hours (696 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 98 ff ff ff ef 00 00:20:51.970 READ DMA EXT
25 00 c2 ff ff ff ef 00 00:20:51.968 READ DMA EXT
25 00 00 ff ff ff ef 00 00:20:51.965 READ DMA EXT
25 00 1e ff ff ff ef 00 00:20:51.955 READ DMA EXT
25 00 40 ff ff ff ef 00 00:20:51.950 READ DMA EXT
Error 6650 occurred at disk power-on lifetime: 16708 hours (696 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 a8 ff ff ff ef 00 00:20:46.900 READ DMA EXT
25 00 20 ff ff ff ef 00 00:20:46.892 READ DMA EXT
25 00 05 ff ff ff ef 00 00:20:46.887 READ DMA EXT
25 00 20 ff ff ff ef 00 00:20:46.881 READ DMA EXT
25 00 20 ff ff ff ef 00 00:20:46.876 READ DMA EXT
Error 6649 occurred at disk power-on lifetime: 16700 hours (695 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 ff ff ff ef 00 09:45:43.577 READ DMA EXT
25 00 05 ff ff ff ef 00 09:45:43.568 READ DMA EXT
35 00 20 ff ff ff ef 00 09:45:43.568 WRITE DMA EXT
25 00 20 ff ff ff ef 00 09:45:43.567 READ DMA EXT
25 00 15 ff ff ff ef 00 09:45:43.554 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 90% 16751 0
# 2 Short offline Completed: unknown failure 90% 16748 0
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
